DIRect
ZC6 BRZ
(H24.4～)
| Concept |
Professionals from each field came together, combining their knowledge to develop this model as a unified collaboration brand by 【Daie-motors】×【Garage ITO】×【RANDO SPORTS】＝ . Using a bumper replacement design with functionality and styling in mind, it makes up for the limitations of the stock bumper and expresses its presence with a WIDE & LOW design. Its unique design completely changes the factory image into something entirely different. In addition, a dedicated lamp is used to address the turn signal issue, achieving a combined lamp with 3 DAYLIGHTs & turn signals. For the BRZ, the 5-LED DAYLIGHT can be used as either a DAYLIGHT or FOG lamp. The rear bumper also uses a dedicated lamp to carry over the image while adding character and considering airflow. An optional center lamp setting is also available, with rear fog function settings possible. The side step also features a unique design without adding bulk, and an under diffuser can be added beneath the side step to adjust the width as desired, creating a sharper, more aggressive design. |
★◆FRONT BUMPER(with LED DAYLIGHT & TURN SIGNAL KIT) (For TOYOTA 86) ※1 The left and right LED mounting sections are usually round-hole type. |
￥98,000 |
|---|---|
◆FRONT BUMPER(with LED DAYLIGHT KIT) (For SUBARU BRZ） ※1 Left and right LED mounting sections are normally round-hole type. |
¥98,000 |
★◆SIDE STEP SPOILER |
¥75,000 |
◆Under Diffuser for Above (FRP) |
￥32,000 |
★◆REAR BUMPER (with LED BACK LAMP KIT)Dual left/right exhaust (Compatible with stock muffler) The LED mounting section on both sides is normally a round-hole type. |
¥98,000 |
★Front/Side/Rear 3-Piece Kit Price |
￥198,000 |
◆Mark F/S/UD (FRP)/R COMPLETE KIT PRICE |
￥218,000 |
CENTER LAMP KIT for REAR BUMPER (rear fog lamp, etc.) |
¥15,000 |
OPTION BLACK NET for bumper (installed on demo car) (Aluminum net [silver] is included as standard.) |
¥8,000 |
3D Canard for F/B (FRP) 3D Canard for F/B (CARBON) |
￥28,000 ￥50,000 |
*1 The turn signal, daytime running light, and back lamp may not pass inspection as-is, depending on the view of each Land Transport Bureau. |
|
(1)3D GT-WING (1350mm, with end plates, FRP) (2)3D GT-WING (1350mm, with end plates, CARBON) (3)3D GT-WING (1500mm, with end plates, FRP) (4)3D GT-WING (1500mm, with end plates, CARBON) (X)ZN6 86/ZC6 BRZ dedicated mount (FRP) |
¥128,000 ¥138,000 ¥128,000 ¥138,000 ¥20,000 |
(A) HI mount 45 mm rear offset specification (B) HI mount 90 mm rear offset specification (C) LOW mount 35 mm rear offset specification Please select one from (1) to (4), (X), and (A) to (C) when ordering. |
|
[Ordered separately] ・HI mount stay (45mm offset type) ・HI mount stay (90mm offset type) ・LOW mount stay (35mm offset type) |
￥28,000 ￥28,000 ￥28,000 |
* The 1350 mm wing product itself complies with safety standards, as it clears vehicle body, size, and R regulations with the dimensions of the vehicle frame, but depending on the interpretation of local transport bureaus and dealers, it may be considered unacceptable. Please regard it basically as a competition-use item. (1500 mm is outside the vehicle frame and for competition use.) |
|
*Image is shared with the ZN6 86. |
|
*Prices are shown excluding tax. |
| SPEC & Special Thanks (RANDO SPORTS Black Edition Version) | ||||||||||||||||||||||||
|